SVEN PS-950 firmware update instructions

To update the firmware, do the following:
1) Copy the XXXXXX.MVA firmware file to USB flash drive. The flash drive must be in FAT32 format, only the file with the firmware should be in the USB flash drive;
2) Turn on the speaker (in any mode);
3) Insert the USB flash drive into the USB port of the speaker;
4) "UPG" massage will appear on display;
5) Wait until "UPG" massage disappears;
6) Remove the USB flash drive from speaker;
7) If speaker is off turn it on;
8) The update is completed.