Instructions for updating the firmware of SVEN SB-2400DD

ATTENTION!!!
FIRMWARE IS FOR SOUNDBAR ONLY, DO NOT UPDATE FIRMWARE OF SUBWOOFER


To update the firmware, you need to do the following:
1) Write the "ota.bin" firmware file to a USB flash drive (up to 4Gb). The USB flash drive must be formatted in FAT32, the USB flash drive must contain only the firmware file;
2) With the power off, insert the USB flash drive into the USB port of the soundbar;
3) Plug the power plug of the soundbar into a power outlet;
4) Wait until the inscription "OL" appears;
5) Turn off the power to the soundbar;
6) Remove the USB flash drive from the USB port of the soundbar;
7) Plug the power plug of the soundbar into a power outlet;
8) The update is complete.